Demonstration panel frame

301300

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.

For ordering the dangerous good or other information please contact our customer service center.
Email: webshopuk@ld-didactic.de
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form

Request an offer

Name *

Email *

Thank you for your inquiry. We will get back to you as soon as possible.

Description

Aid for setting up experiments on the vertical, can be assembled in various ways. Usable directly, for example, with experiment panels or adhesive magnetic board. It is possible to attach rods, including to the cross piece. Shelves and profile rails can also be added.
In order to create a mobile experiment stand, it should be fitted to a base trolley (598 111) or mobile experiment bench (598 115).

Technical data

Width: 97 cm
Height: 91 cm
Depth: 35 cm

Scope of delivery

2 Side pieces
1 Cross-piece
2 Profile rails (301 311)

Additionally recommended

2 30105 4 Bench clamp with pin

Related Documents

PDF (Instruction Sheet)	[301 300] Demonstration panel frame
PDF (Experiment description)	D3.4.1.1a Simple circuit - Assembly using connector blocks
PDF (Experiment description)	D3.4.1.2a Connecting incandescent lamps in series - Assembly using connector blocks
PDF (Experiment description)	D3.4.1.3a Connecting incandescent lamps in parallel - Assembly using connector blocks
PDF (Experiment description)	D3.4.1.4a Measuring current in a simple circuit - Assembly using connector blocks
PDF (Experiment description)	D3.4.1.5a Measuring voltage in a simple circuit - Assembly using connector blocks
PDF (Experiment description)	D3.4.1.6a Connecting batteries in series - Assembly using connector blocks
PDF (Experiment description)	D3.4.1.7a Connecting batteries in parallel - Assembly using connector blocks
PDF (Experiment description)	D3.4.2.1a Change-over switches - Assembly using connector blocks
PDF (Experiment description)	D3.4.2.2a Two-way switches - Assembly using connector blocks
PDF (Experiment description)	D3.4.2.3a AND circuit - Assembly using connector blocks
PDF (Experiment description)	D3.4.2.4a OR circuit - Assembly using connector blocks
PDF (Experiment description)	D3.4.2.5a Bimetal switches - Assembly using connector blocks
PDF (Experiment description)	D3.4.3.1a Current flow in solid bodies - Assembly using connector blocks
PDF (Experiment description)	D3.4.3.2a Current flow in liquids - Assembly using connector blocks
PDF (Experiment description)	D3.4.4.1a Ohm's law
PDF (Experiment description)	D3.4.4.2a Relationship between resistance and length of a wire - Assembly using connector blocks
PDF (Experiment description)	D3.4.4.3a Relationship between resistance and cross-section of a wire - Assembly using connector blocks
PDF (Experiment description)	D3.4.4.4a How a wire's resistance depends on its material - Assembly using connector blocks
PDF (Experiment description)	D3.4.4.5a Connecting resistors in series - Assembly using connector blocks
PDF (Experiment description)	D3.4.4.6a Connecting resistors in parallel - Assembly using connector blocks
PDF (Experiment description)	D3.4.4.7a How electric current gives rise to heat and light - Assembly using connector blocks
PDF (Experiment description)	D3.4.4.8a Resistance characteristics of an incandescent lamp - Assembly using connector blocks
PDF (Experiment description)	D3.4.4.9a Melting fuse - Assembly using connector blocks
PDF (Experiment description)	D3.4.5.1a Charging and discharging a capacitor - Assembly using connector blocks
PDF (Experiment description)	D3.4.5.1b Charging and discharging a capacitor - Joulemeter and wattmeter (de)
PDF (Experiment description)	D3.4.5.2a Discharge curve of a capacitor - Assembly using connector blocks (de)
PDF (Experiment description)	D3.4.6.7a Electrical work done by an immersion heater - AC meter (de)
PDF (Experiment description)	D3.5.1.1a Magnetic effect of electric current - Assembly using connector blocks
PDF (Experiment description)	D3.5.2.1a Model of an electromagnet - Assembly using connector blocks
PDF (Experiment description)	D3.5.2.2a Model of a relay - Assembly using connector blocks
PDF (Experiment description)	D3.5.2.3a Model of an electric bell - Assembly using connector blocks
PDF (Experiment description)	D3.5.2.4a Magnetic circuit breakers - Assembly using connector blocks
PDF (Experiment description)	D3.5.5.1a Electromagnetic induction with two coils - Assembly using connector blocks
PDF (Experiment description)	D3.5.5.2a Voltage transformation - Assembly using connector blocks
PDF (Experiment description)	D3.5.5.3a Current transformation - Assembly using connector blocks
PDF (Experiment description)	D3.6.1.1 Magnetic field of a permanent magnet stator
PDF (Experiment description)	D3.6.1.2 Magnetic field of an electro-magnetic stator
PDF (Experiment description)	D3.6.1.3 Magnetic field of a permanent magnet rotor
PDF (Experiment description)	D3.6.1.4 Magnetic field of an electro-magnetic rotor with slip rings
PDF (Experiment description)	D3.6.1.5 Magnetic field of an electro-magnetic rotor with commutator
PDF (Experiment description)	D3.6.2.1a Stationary armature generator - Measurement via demo multimeter
PDF (Experiment description)	D3.6.2.1b Stationary armature generator - Measurement via Sensor-CASSY
PDF (Experiment description)	D3.6.2.2a Stationary armature generator - Dependence on induced voltage
PDF (Experiment description)	D3.6.2.3a Stationary armature generators under load
PDF (Experiment description)	D3.6.2.4a Rotating armature generators for generating alternating voltage - Measurement via demo multimeter (de)
PDF (Experiment description)	D3.6.2.4b Rotating armature generators for generating alternating voltage - Measurement via Sensor-CASSY
PDF (Experiment description)	D3.6.2.5a Rotating armature generators for generating DC voltage - Measurement via Sensor-CASSY
PDF (Experiment description)	D3.6.2.6a Generating a three-pole alternating voltage - Demonstration using lamps
PDF (Experiment description)	D3.6.2.6b Generating a three-pole alternating voltage - Demonstration via demo multimeter
PDF (Experiment description)	D3.6.3.1a Simple DC motors
PDF (Experiment description)	D3.6.3.2a Self-starting DC motors
PDF (Experiment description)	D4.1.1.1b Temperature-dependent NTC and PTC resistors - Assembly using connector blocks and bridging plugs
PDF (Experiment description)	D4.1.1.3a Light-dependent resistors LDR - Assembly using connector blocks
PDF (Experiment description)	D4.1.1.4a Voltage-dependent resistors - Assembly using connector blocks
PDF (Experiment description)	D4.1.2.1a Silicon diodes in a DC circuit - Assembly using connector blocks
PDF (Experiment description)	D4.1.2.2a Rectifying effect of diodes - Assembly using connector blocks
PDF (Experiment description)	D4.1.2.4a Characteristic of a silicon diode - Assembly using connector blocks
PDF (Experiment description)	D4.1.2.5a Light-emitting diodes in a DC circuit - Assembly using connector blocks
PDF (Experiment description)	D4.1.2.6a Characteristics of light-emitting diodes - Assembly using connector blocks
PDF (Experiment description)	D4.1.2.7a Polarity tester for light-emitting diodes - Assembly using connector blocks
PDF (Experiment description)	D4.1.3.1a Open-circuit voltage of a solar cell - Assembly using connector blocks
PDF (Experiment description)	D4.1.3.2a Short-circuit current of a solar cell - Assembly using connector blocks
PDF (Experiment description)	D4.1.3.3a Connecting solar cells in series - Assembly using connector blocks
PDF (Experiment description)	D4.1.3.4a Connecting solar cells in parallel - Assembly using connector blocks
PDF (Experiment description)	D4.1.3.6a Converting light energy into mechanical energy Motor with propeller
PDF (Experiment description)	D4.1.3.6b Converting light energy into mechanical energy Micromotor
PDF (Experiment description)	D4.1.4.1a Transistors as a combination of diodes - Assembly using connector blocks
PDF (Experiment description)	D4.1.4.2a Working principle of a transistor - Assembly using connector blocks
PDF (Experiment description)	D4.1.4.3a Transfer characteristic of a transistor - Assembly using connector blocks
PDF (Experiment description)	D4.1.4.4a Transistors used as an electronic switches - Assembly using connector blocks
PDF (Experiment description)	D4.1.4.5a Phototransistors - Assembly using connector blocks
PDF (Experiment description)	D4.1.5.1a Twilight switch - Assembly using connector blocks
PDF (Experiment description)	D4.1.5.2a Temperature-controlled transistor - Assembly using connector blocks
PDF (Experiment description)	D4.1.5.3a Single-stage microphone amplifier - Assembly using connector blocks
PDF (Experiment description)	D4.1.5.4a Signal transmission via optical fibre - Assembly using connector blocks
PDF (Experiment description)	D4.1.5.4b Signal transmission via optical fibre - Assembly with single-stage transistor amplifier

Print page

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe

For European distributors, please visit: European distributors

Worldwide requests

Demonstration panel frame

Description

Technical data

Scope of delivery

Additionally recommended

Related Documents

Contact Us