EV High voltage workstation

LD 739980
EV High voltage workstation
EV High voltage workstation
EV High voltage workstation

Description

This high-voltage workstation provides a learning environment for the three-stage high-voltage training according to the German DGUV.

The unit is equipped with three service disconnect systems so that different manufacturers can be simulated:

  1. Service disconnect plug with integrated fuse used to connect the two HV battery banks.
  2. Service disconnect plug for interrupting the main relay supply (terminal 30c)
  3. Specially marked fuse for interrupting the relay supply

The service disconnect plugs can be secured against reconnection with original manufacturer accessories.

The HV battery as well as the inverter are covered with lockable and removable top parts. Thus, the task "working under voltage" can only be carried out after release by the instructor.

An insulation monitor device (IMD) is installed inside the highvoltage battery. It has a threshold value to trigger the shutdown of the system automatically.

The switching states of the three contacts of the main relay are indicated optically. In addition, a dangerous body current and the presence of high voltage in the inverter are indicated optically.

The equipotential bonding resistance at major points meets both the ECE R100 requirement of 100 mΩ and the stricter car manufacturer specifications of 10 mΩ.

Various HV components and a human person can be displayed via overlay masks. This allows insulation faults (body short circuit), equipotential bonding faults and the principle of 1st and 2nd fault in the IT network to be displayed very clearly. The unit is equipped with correspondingly defined switchable faults.

To illustrate the "intrinsic safety", a pilot line across all HV components incl. the plug-in contacts is included in the unit.

Technical data

  • Power supply: 100-250 VAC, 50/60 Hz
  • Automotive voltage: 12 VDC
  • Highvoltage: 105 VDC 
  • Width: 500 mm

Scope of delivery

  • Workstation with accessories
  • Power supply
  • Power cord

Related Documents

PDF (Instruction Sheet) PDF (Instruction Sheet) [739 980] EV High voltage workstation
PDF (Supplement to the instruction sheet) PDF (Supplement to the instruction sheet) [739 980] EV High voltage workstation (de)
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us