System
The course teaches the essential functions of a Programmable Logic Controllers (PLC). The trainer package for the Siemens PLC S7-1512C-1 PN contains assembly parts and accessories including the required PLC.
Learning objectives
- Creating programmes
- Learning logic and control functions
- Testing the programmes
- Setting up Profi-Net and Profi-Bus network connections
Teaching system
The training system consists of:
- SIMATIC S7-1500 KOMPAKT CPU, CPU 1512 C-1 PN, 32x DI, 32 DO, 5 AI, 2AO
- SIMATIC STEP 7 Professional
- ETHERNET cable
- Communication processor CP 1542-5
- Base plate PLC
Description of the PLC base plate:
- 24 digital inputs of which 16 with push-button latching switch and 16 digital outputs are directly accessible via safety sockets (4 mm).
- 32 digital inputs and 32 digital outputs are accessible via 27-pin connectors with assignment for MCS.
- 2 analogue input channels and 2 analogue output channels are accessible via safety sockets (4 mm).
- Depending on the PLC, 5 analogue input channels and 4 analogue output channels are accessible via two 30-pin connectors.
- Profi-Net is connected directly to the CPU.
- The power supply unit is connected via an IEC plug with switch.
- The power supply unit is designed for an output of 156 W at 115 VAC / 230 VAC and 47-63 Hz. The mains voltage is preset.
- The control voltage is 24 V DC at max. 6.5 A.
Method
Carrying out student experiments according to the tasks in the experiment description.
Target group
Vocational training in electrical engineering in trade and industry. The course imparts knowledge at an advanced level.
Previous knowledge
- Basics of contactor control
- PLC Programming
- Familiarisation with the dangers of electrical engineering.
Supplements
The following equipment is recommended for in-depth study:
- E7.1.3.3 Contactor Controls with 24 V Modules, 24 V
- E7.1.3.5 Contactor Controls with 24 V Experimental Panels, 24 V
- E7.1.3.2 Control with limit and proximity switches
- E7.3.1.2 ASIMA for PLC - Basic
- E7.4.1.1 ASIMA for PLC - Advanced
- E7.4.1.2 ASIMA for PLC - Advanced with visualisation
- E7.4.3.1 Mechatronic Compact Model: Automatic Sorting Line
- E7.4.3.2 Mechatronic Compact Model: High-bay Warehouse with Equipment Control
- E7.4.3.3 Mechatronic Compact Model: Equipment Control with Quality Inspection
Topics
- Programming a PLC
- Programming Method LAD, FBD, IL, S7-GRAPH,
- Extended programme structure
- Logical links
- Timer and timer functions
- RS elements
- Counting and frequency measurement
- Analogue value processing, setpoint and control
