System
The experiments are carried out with the LOGO! 8 small controller from Siemens. The logic module is mounted on a base plate and suspended in the profile frame. The LOGO! 8 programming and the essential functions of Small Controllers are to be learnt. Contains six teaching systems for programming a Small Controllers on the LOGO! 8 from Siemens.
Learning objectives
- Operating a Small Controllers.
- Creating programmes.
- Learning logical and control functions.
- Testing programmes.
- Setting up network connections
Features
This equipment contains six teaching systems.
Each teaching system consists of:
- LOGO8! 12/24 RCE
- EXTENSION MODULE LOGO! DM8 12/24R
- LOGO! soft comfort
- Small Controllers base plate
Description of the Small Controllers base plate
- 14 digital inputs and 10 transistor outputs connected to the base plate via 4 mm safety sockets.
- Inputs can be wired using the built-in switches with latching and push-button function.
- Sockets can be set to 24 V.
- Analogue signal processing is possible via two analogue inputs and two analogue outputs.
- Control unit with Ethernet interface (RJ 45)
- Control voltage: 24 V DC
Method
Carrying out student experiments according to the tasks in the experiment description.
Target group
Vocational training in electrical engineering in trade and industry. The course imparts knowledge at an intermediate level.
Previous knowledge
- Basics of contactor control
- Programming Small Controllers
- Familiarisation with the dangers of electrical engineering
Supplements
The training system can be supplemented with the following equipment:
- E7.1.3.3 Contactor Controls with 24 V Modules, 24 V
- E7.1.3.5 Contactor Controls with 24 V Experimental Panels, 24 V
- E7.1.3.2 Control with limit and proximity switches
- E7.3.1.1 ASIMA for Small Controllers.
Topics
- Programming Small Controllers
- Logical links
- Timer and timer functions
- RS elements
- Counting and measuring frequencies
- Analogue value processing
- Setpoint and control
- Web server
- App for LOGO!8
