Workshop Case KNX Expert

LD 772 902
Workshop Case KNX Expert
Article not yet available!

Description

Our "Workshop Case KNX Expert" has been developed in collaboration with our partner, leading manufacturer of building system technology and co-founder of the KNX Association Gira. The case contains the latest smart home technology from Gira, which trainees can use to learn how to plan and programme KNX-based smart home systems in a practical way. The experimental case simulates realistic living room scenarios of a living room with lighting, heating and blinds, each of which is displayed via LEDs.

The trainees learn how to program, analyse and optimise complex infrastructure systems with ETS for KNX. The scenarios can be flexibly implemented as a one- or two-channel KNX bus structure and, if required, expanded to include a KNX weather station. This makes them qualified experts for smart homes and modern building system technology.

The KNX system can be programmed using the ETS software (not included in the scope of delivery) via the 4-gang network sockets and the internally connected POE (Power Over Ethernet) switch. The built-in socket can be used as a power supply for the programming computer.

The case was developed and designed for optimum use in training. In addition to the high density of state-of-the-art KNX technology, the built-in dimmable LED strip can also be used as a task light and the dimensions of the case allow a good view of the trainees or teaching staff during use.

Technical data

  • Lid with detachable castors and swivel-mounted displays
  • Case base and lid can be separated
  • Dimensions (H X W x D) = 268 x 755 x 328 mm (without handles)
  • Power supply U1= 230 V
  • Frequency f= 50...60 Hz
  • Maximum power P1= 1800 W
  • Fuse protection T: = 8.0 A

Scope of delivery

The following components are stowed in the sides of the case:

  • Mains cable Safety plug
  • KNX RF remote control

The following components are installed in the case:

  • Gira Home Server X1
  • Gira remote access S1
  • 2x KNX power supply
  • Heating actuator
  • Dimming actuator
    Switching and blind actuator
  • Media coupler
  • Line coupler
  • Various KNX switching elements (push-buttons, rockers, etc.)
  • Dimmable LED strip
  • POE switch inside 48 V 60 W
  • 4-way network socket
  • Socket outlet with USB-A and USB-C
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us