ASIMA Plant Simulator II

EW 773050
ASIMA Plant Simulator II
ASIMA Plant Simulator II
ASIMA Plant Simulator II

Description

ASIMA Plant Simulator II

The plant simulator "Advance" II simulates plants which are represented by masks. The ASIMA II software and the mask are matched by the selection switch. A student should independently develop a program for a PLC after the task, and test it at the simulator. In addition to the literature, there is also a com3Lab course, which communicates with the device via a USB cable.

There are 33 masks available which can be up to 5 work instructions for the individual facilities for the program development for students.

Basic unit for system simulator ASIMA II

The inputs and outputs are accessible via 4-mm safety sockets or a 700 mm long 50-pole flat-ribbon cable to a PLC or logic controler over a 50-pole socket.

Technical data

Inputs / outputs

  • 12 digital inputs, 12 digital outputs
  • 2 analog inputs, 2 analog outputs
  • 4 relay contacts NCC

Control and indication elements:

  • 6 buttons
  • 6 toggle switches
  • 33 LEDs
  • 2 potentiometers for 0 ... 10 V DC
  • 1 red bargraph indication with 24 segments
  •  Digital in and output voltage of 24 V DC
  • Analog in and output voltage of 0 ... 10 V DC
  • Required power supply: 24 V DC, 0.7 A max.
  • Ethernet RJ 45
  • USB

Additionally required

1 77304901  4  Mask M1 Logic basic functions LD
1 77304902  4  Mask M2 Digital function modules LD
1 77304903  4  Mask M3 Motor ON/OFF LD
1 77304904  8  Mask M4 Reversing contactor LD
1 77304905  4  Mask M5 Star-delta connection LD
1 77304906  8  Mask M6 Reversing star-delta connection LD
1 77304907  4  Mask M7 Pendulum table control LD
1 77304908  4  Mask M8 Dahlander circuit LD
1 77304909  8  Mask M9 Motor with 2 windings LD
1 77304910  4  Mask M10 Motor self-starter LD
1 77304911  8  Mask M11 Conveyor belt system LD
1 77304912  4  Mask M12 Reactive-current compensation LD

Related Documents

PDF (Instruction Sheet) PDF (Instruction Sheet) [773 050] ASIMA Plant Simulator II

Downloads

EXE EXE COM3LAB Software Package (3.1.415)
Free full version (ca. 1.5GB), compatible with 700 00-00 (COM4LAB Master Unit)
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us