Speed-variable drives with asynchronous motors are a preferable choice nowadays. They are a solution combining good value, flexibility, maintenance freedom and efficiency for a production drive.
The efficiency of drives can be improved, especially if they are started frequently or change direction of rotation several times per hour.
The efficiency of drives can be improved, especially if they are started frequently or change direction of rotation several times per hour. This development is expanding globally due to the requirements of efficiency guidelines.
Objectives
- Energy requirement for starting under load
- Energy requirement for change of direction of rotation
- Behaviour of working machines
- Torque is constant as with lifts; cranes (TL = const.)
- Torque rises lineally with speed; extruder, flexing work (TL ~ n)
- Torque rises quadratically with speed; turbo machines, fans, pumps (TL ~ n)
- Torque decreases inversely proportional to speed; lathes and milling machines, winding machines (TL = 1/n)
- Flywheel mass
The learner will get to know the behaviour of working machines on a drive with asynchronous motor. In the first few experiments, the efficiency of a speed-variable drive is investigated. In later experiments, the different behaviours of working machines are presented.%nbsp; Characteristics diagrams and time diagrams are recorded and analysed for evaluation purposes.
Highlights:
- The measurements are carried out with the CASSY Machine Test.
- All measurement channels are potential-free and can therefore be used freely.
- All measurements can be carried out with or without a computer.
- In order to protect against overheating, the stator windings of the asynchronous motor are equipped with thermal detectors.
- The asynchronous motor has an educationally designed terminal board with the winding configuration printed on it.
The equipment is equally suitable for pupil and student experiments in the laboratory with low voltage (DC, AC and three-phase current) and - with a mobile trainer - for teacher demonstrations in the classroom or lecture hall. The experiments are carried out according to the manual.
In the following configurations there are further extended experiments performed with a frequency converter and an asynchronous machine:
- E2.5.3.2 Basics of frequency converter technology
- E2.5.3.3 Drives with educational frequency converter
- E2.6.2.3 AC servo with industrial asynchronous machine
Topics
- Energy efficiency of drives
- Work machines with:
-
- TL = const.
- TL ~ n
- TL ~ n²
- TL ~1/n
- Flywheel mass
- real work machine
