AC servo with industrial separately excited synchronous machine

VE2.6.2.4
AC servo with industrial separately excited synchronous machine
AC servo with industrial separately excited synchronous machine
AC servo with industrial separately excited synchronous machine
AC servo with industrial separately excited synchronous machine

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.


For ordering the dangerous good or other information please contact our customer service center.
Email: webshopuk@ld-didactic.de
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form

˟

Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.

˟

Description

E2.6.2.4 AC servo with industrial separately excited synchronous machine

AC servos with separately excited synchronous machines are able to adapt the property of the motor, especially in production machines, by changing the field. This type of machine is also used with electric vehicles. This equipment allows the learner to investigate the properties of this variable drive.

Objectives

  • Optimising control loops
  • 2 and 4 quadrants control
  • Static speed control
  • Highly dynamic speed control
  • Dynamic speed control
  • Position control
  • Step response

The set-up of an AC servo with a separately excited asynchronous machine is analysed. Measurements and calculations are used to attempt to optimise the drive for its applications.

  • Calculating the control difference
  • Analysing loads with step of reference variable
  • Approaching stability limits

Highlights:

  • The measurements are carried out with the CASSY  converter controller.
  • All measurement channels are potential-free and can therefore be used freely.
  • All measurements can be carried out with or without a computer.
  • In order to protect against overheating, the stator windings of the separately excited synchronous machine are equipped with thermal detectors.
  • The separately excited synchronous machine  has an educationally designed terminal board

All functions of the Converter Controller CASSY can be operated quickly and directly via the display, the rotary wheel and the buttons on the unit. All settings and measurement results can be saved on the unit and quickly called up again later or simply downloaded.

In addition, the Converter Controller CASSY is fully controllable in real time via RJ45 Ethernet, W-LAN and USB-C interfaces.

These interfaces can be used by the following software:

  • CASSY Lab 2 for drives and energy systems,
  • MATLAB® and LabVIEW ™
  • Lab Docs Editor Advanced

Several integrated servers are available in Converter Controller CASSY for the local media connection of at least four end devices simultaneously.

For more details, see product data 7735290 or 7735291 Converter Controller CASSY.

The equipment is equally suitable for pupil and student experiments in the laboratory with low voltage (DC, AC and three-phase current) and - with a mobile trainer - for teacher demonstrations in the classroom or lecture hall. The experiments are carried out according to the manual.

The target group is made up of commercial apprentices and students of electrical machine construction. The course offers experiments at an intermediate level and also allows for the necessary insight into machine behaviour for scientific interpretation at undergraduate level. The media connection makes the experiments suitable for demonstration in the classroom or a lecture hall.

In the following configurations there are extended experiments performed with the educational frequency converter and a permanently excited or separately excited synchronous machine:

  • E2.6.1.1 Basics of commutation technology
  • E2.6.1.2 Block commutated synchronous machine
  • E2.6.1.3 Sinus-commutated permanently excited synchronous machine with surface magnets
  • E2.6.1.4 Incrementally commutated permanently excited synchronous machine with embedded magnets
  • E2.6.2.3 AC servo with industrial permanently excited synchronous machine

Topics

  • Coupling of motor, commutation and incremental tachometer
  • Stationary behaviour
  • Measurement of the motor current
  • Variation of the modulation frequency
  • Dynamic behaviour
  • Structure of the control
  • Investigation of the angular acceleration depending on the maximum limit current
  • Position control with and without subordinate current and speed controllers
  • Investigation of positioning time and overshooting depending on speed and current limits and ramp time

Components of equipment sets

1 735290  4  Connecting cable universal converter LD
1 7735297 Universal converter LD
1 7735295 DC power supply 390 V, 6 A, (PFC) LD
1 524222 CASSY Lab 2 for Drives and Power Systems LD
Prime mover:
1 773237  8  Synchronous machine VP, 0.3 LD
Commutation:
1 7731092 Incremental tacho, 0.3 LD
1 773115 Machine base bench, 120 cm LD
3 773108  8  Coupling / shaft end guard 0.3, transparent LD
1 73106  4  Coupling, 0.3 LD
Required for the position control:
1 7731075 Gear, 0.3 LD
1 773108  8  Coupling / shaft end guard 0.3, transparent LD
1 73106  4  Coupling, 0.3 LD
Manuals:
Literature is in preparation:
Power supply:
1 745021  4  Excitation voltage controller 200 V/2.5 A LD
1 72671 Single-phase terminal unit LD
Accessories:
1 72609  4  Panel frame T130, two-level LD
1 50059  8  Safety bridging plugs, black, set of 10 LD
1 500591  4  Safety bridging plugs, yellow/green, set of 10 LD
3 500602  4  Safety experiment cable, 10 cm, blue LD
1 500855  4  Safety experiment cables, 32 A, set of 34 LD
1 500856  4  Safety experiment cables, 32 A, yellow/green, set of 5 LD
Additionally required:
PC with Windows 7/8/10
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us