Power Analyser CASSY Plus

LD 727111
Power Analyser CASSY Plus
Power Analyser CASSY Plus

Description

The Power Analyser CASSY is a combination of isolated and differential oscilloscope, multimeter, wattmeter, energy analyzer and recorder. It was designed in its concept for demonstration and laboratory experiments.

The Power Analyser CASSY differs from its previous model in that it has an additional LAN connection

The Power Analyser CASSY has been optimized for the following applications:

Power grids:

  • Voltage and frequency stability
  • Load behavior of networks
  • Effect of harmonics

Electrical machines:

  • Inrush current of transformers and machines
  • Ratio of transformers
  • Efficiency of machines

Power Electronics:

  • rectifier
  • DC / DC converter
  • DC / AC converter
  • frequency converter
  • filter

POWER ANALYSER CASSY - IN DETAIL

  • simultaneous measurement of U, I, φU, φI, f and P
    • instantaneous values U, I and P
    • averaged values U, I and P
    • RMS values (AC+DC) U and I
    • fundamental wave filters
    • Delta connection adjustment
    • Measuring accuracy U,I is at 0.5%.
    • Frequency response voltage: 100 kHz 3 dB 250 V
    • Frequency response current: 40 kHz 3 dB at 10 A  
  • universal connection options
  • automatic or manual range selection
  • Support of the successful measurement software CASSY Lab 2 for Drives and Power Systems 524    222 for computer-aided measurements and simple to highly complex evaluations
    • Electrical power calculation S, P, QC and QL
    • Electrical work WS, W and WQ
    • Resistance calculation R, Z, XC, XL, G, Y BC and BL
    • Positive sequence component, negative sequence component and zero sequence component in 3-phase systems
    • Time derivative, integral over time, FFT analysis, mean value, histogram, and modelling
    • Drivers for LabVIEW ™ and MATLAB® available
  • Possibility of direct manual operation of the device by means of a rotary selector with cursor keys direct value readings on 9 cm backlit display
    • Display of up to 24 measured values on one display
    • Display of all values for each channel
    • Display of all values in tabular form
    • Display of measured values in a diagram
    • Display of a vector diagram
  • Measuring instrument category CATIII 300: allows the use of the measuring instrument for
    tests with safety extra-low voltage (SELV) via 3-phase systems with or without neutral conductor, up to testing in power electronics, e.g. DC link voltage of 700 V DC
  • Real-time processing in the device enables comprehensive network analysis in the three-phase networks, which are displayed directly on the device in the vector diagram

Digital and media connection

The Power Analyser CASSY is fully controllable in real time via the following interfaces:

  • RJ45 Ethernet (IP4 / IP6 networks)
  • WiFi IEEE 802.11 a/b/g/n supports WPA, WPA2, WPA3 and Radius Server
  • USB-C for direct PC connection or for external data carriers, also for simplified configuration.

These interfaces can be used by the following software, among others.

  • CASSY Lab 2 for drives and energy systems,
  • MATLAB® and LabVIEW ™ with freely available examples,
  • Lab Docs Editor Advanced / Pro for generating individual experiment instructions in HTML and with JavaScript even without programming experience.


The following integrated servers are available in the Power Analyser CASSY for the local media connection of up to 3 end devices simultaneously.

  • TCP server for the CASSY app
  • DHCP server for use with PC direct connection or as Wifi hotspot
  • HTTP server for the CASSY Web App
  • WebSocket server for WebSocket clients, such as Leybold Lab Doc
  • VNC server for 1:1 transmission of screen contents to remote devices, including a return channel for control purposes

PLUS:

Isolation amplifiers:

  • 4-channel isolation amplifier with the possibility of outputting I, U, UxI to the assigned output U, V, W and X.
  • Mathematical functions between the channels (A + B, AxB, etc)

Function generator:

  • 1 output channel Y as function generator
  • DC / sine / rectangle / triangle and free function

Technical data

DISPLAY & OPERATION

  • Graphic display: 9 cm (3.5 "), QVGA, colored, light (adjustable up to 400 cd / m²)
  • Operation: Pushbutton and incremental encoder with pushbutton

INPUTS & OUTPUTS

  • Inputs: 4 isolated measuring channels CAT III 300, each with I and U
  • measurement (max. 8 can be used at the same time)
  • Input A -D: U and I connection via 4 mm safety sockets
  • Measuring ranges U: 25/70/250/700 VAC ± 36 / ± 100 / ± 360 / ± 1000 VDC
  • Measuring ranges I: 0.7 / 1.6 / 7/16 / AAC ± 1 / ± 2.5 / ± 10 / ± 16 ADC
  • Sampling rate: max. 1,000,000 values / s per channel at U and I max. 500,000 values / s
  • Analog outputs: A-D ± 10 V 200 mA

FUNCTION GENERATOR

  • Frequency range: 10 mHz ... 20 kHz
  • Amplitude: ± 10 V 200 mA
  • Waveform: Sine, Rectangle, Pulse Width, DC Offset, Triangle and Free Function fX
  • Resolution of the analog inputs: 16 bits

GENERAL

  • Loudspeaker: Error message when exceeding the measuring ranges
  • Data storage: built-in Micro SD card (4 GB) for over a thousand measurement files and screenshots
  • Wi-Fi: 802.11 b / g / n as access point or client (WPA / WPA2)
  • VNC server: integrated
  • LAN connection: Ethernet (RJ-45 socket)  
  • USB ports: Connect a USB Type C
  • Mains voltage: 230 V 50 - 60 Hz (conversion to 115 V possible)
  • Connected load: 50 W
  • Dimensions: 300 mm x 300 mm x 180 mm
  • Weight: 3.7 kg

Scope of delivery

  • 2x Power cord EU / GB
  • 1x USB A / C cord

Related Documents

PDF (Instruction Sheet) PDF (Instruction Sheet) [727 111] Power Analyser CASSY Plus

Downloads

Web Link Web Link CASSY.App Web
ZIP ZIP Mobile Config, Mobile Edit and Power Analyser CASSY Firmware (V1.10)
Utilities und Firmwareupdate ohne CASSY Lab 2
MSI MSI CASSY Lab 2 for Drives and Power Systems (en, V2.29)
Free demo version, full version requires a licence code of CASSY Lab 2 for Drives and Power Systems
MSI MSI CASSY Lab 2 for Drives and Power Systems (fr, V2.29)
Free demo version, full version requires a licence code of CASSY Lab 2 for Drives and Power Systems
MSI MSI CASSY Lab 2 for Drives and Power Systems (es, V2.29)
Free demo version, full version requires a licence code of CASSY Lab 2 for Drives and Power Systems
MSI MSI CASSY Lab 2 for Drives and Power Systems (pt, V2.29)
Free demo version, full version requires a licence code of CASSY Lab 2 for Drives and Power Systems
MSI MSI CASSY Lab 2 for Drives and Power Systems (it, V2.29)
Free demo version, full version requires a licence code of CASSY Lab 2 for Drives and Power Systems
MSI MSI CASSY Lab 2 for Drives and Power Systems (nl, V2.29)
Free demo version, full version requires a licence code of CASSY Lab 2 for Drives and Power Systems
MSI MSI CASSY Lab 2 for Drives and Power Systems (ru, V2.29)
Free demo version, full version requires a licence code of CASSY Lab 2 for Drives and Power Systems
MSI MSI CASSY Lab 2 for Drives and Power Systems (zh, V2.29)
Free demo version, full version requires a licence code of CASSY Lab 2 for Drives and Power Systems
Manual Manual CASSY Lab 2 Manual (en)
Manual Manual CASSY Lab 2 Manual (fr)
Manual Manual CASSY Lab 2 Manual (es)
Web Link Web Link CASSY Lab 2 Web Help (en)
Web Link Web Link CASSY Lab 2 Web Help (fr)
Web Link Web Link CASSY Lab 2 Web Help (es)
ZIP ZIP CASSY SDK for own software development (Windows/Linux)
ZIP ZIP LabVIEW driver for LabVIEW 2017 or higher (Windows)
ZIP ZIP MATLAB driver with examples (Windows)
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us