Three-phase stator, 0.3

The stator consists of:

• Housing with windings
• End shield star grip screws
• Terminal box with bushings
• Base with feet and mounting lugs.
• Equipotential bonding connection

The stator windings are connected to the sockets U1 - U2, V1 V2 and W1 - W2. The temperature switch, which is located in the windings, is accessible via the red safety sockets. The housing, terminal box and end shield are connected to the protective earth socket.

The sockets K (F1), L and M(F2) only serve to accommodate the cables coming from the rotors and have no function in the stator itself.

The end shield is connected to the stator housing with 2 screws (top, bottom). Two star grip screws are used to fix the different rotors. On the open side of the stator, the upper fastening hole is adapted so that the bolt of the rotor can dip into it.

The technical data of the individual machines are written on the rotors (774 7721, 774 7722, 774 7723, 774 7724, 774 7725, 774 7729).